products

Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment

اطلاعات پایه
محل منبع: جیانگ سو، چین
نام تجاری: Yushun
گواهی: ISO 9001
شماره مدل: سفارشی
مقدار حداقل تعداد سفارش: 1 مجموعه
قیمت: Negotiated
جزئیات بسته بندی: بسته معمولی برهنه یا بسته بندی آن بر اساس درخواست مشتریان
زمان تحویل: 30 روز
شرایط پرداخت: L/C، T/T
قابلیت ارائه: مذاکره کرد
اطلاعات تکمیلی
نام: کوره گرمایش القایی بیلت تایپ کنید: کوره القایی
ولتاژ: بسته به تولید وزن: متغیر
وضعیت: جدید ضمانتنامه: 1 سال
کاربرد: خط آسیاب نورد قدرت: متغیر
برجسته:

1180C induction billet heating furnace,Steel induction billet heating furnace,10kg continuous furnace heat treatment

,

Steel induction billet heating furnace

,

10kg continuous furnace heat treatment


توضیحات محصول

Reheating Steel Billet Induction Heating Furnace for Rolling Mill Line

 

Use of billet reheating furnace:
1.The billet reheating furnace is mainly used in the rolling steel production line. After the billet exits the continuous casting machine, before entering the rolling mill.
2.Billet reheating furnace is mainly used to increase billet temperature.
3.Can be used for cold billet heating.

Characteristics of billet reheating furnace:
1.The billet reheating furnace has a fast heating rate and uniform temperature.
2.Small footprint and easy operation.
3.No need to preheat, save energy.
4.No pollution, environmental protection.

 

1. Many rolling mill have many cold billets need to reheat.some hot billets goes out from casting machine,because of long rolling table,the temperature of hot billets fall down to 600C-800,need reheat billets to 1250C to go to rolling machine.

2. Induction reheating furnace can special design for rolling mill.Can design furnace type according to customer’s roll table direction.Induction reheat furnace can use for reheat billets ,or heat cold billets to 1250C

3. Induction reheating furnace are customized under customer's workshop size.and customer's special requirement.

4. Furnace can also heat all kinds of iron/steel/aluminum bars,boards,pipes.etc

5. Heating speed fast,can stop production at any time.This advantage is much better than gas furnace.

6. Easy operation and maintenance. Environmental protection.

 

Specification of heating furnace for rolling mill:

Model KGPS-1000
Rated power 1000KW
Input voltage 660V
Phase numbers 3
Rated medium voltage 1500V
Input power 1250KVA
Output power 1000KW
Rated frequency 1500HZ
Input water temperature ≦35℃
Output water temperature ≦55℃

 

Furnace body:
1. The induction coil is insulated by two insulation treatment, high temperature insulating paint and fiberglass ribbon winding.
2. The top of the furnace body is designed with sliding cover, which is convenient for maintenance and inspection.
 
Feeding system:
1. The feeding system adopts pinch roll feeding, which is suitable for bar diameter range of 40-120mm.
2. The feeding speed is controlled by variable frequency motor and the feeding speed is adjustable.
3. The pitch roller feeding motor and the reducer all adopt aluminum shell, which can effectively prevent the hot around the coil
 
Temperature control:
1. This system can accurately control the outlet water temperature, the water inlet and outlet of furnace body adopt water-cooled copper plate.
2.  The cooling water pipe of the furnace body adopts high temperature carbon-free hose, the service lifetime is more than three
years.
 
Control cabinet:
1. The main control board of the cabinet is micro computer control, one-key zero pressure start, plug and play.
2. The separate insolation design of water pressure meter of furnace body and control cabinet can make the user more convenient and intuitive to monitor the water pressure of control cabinet and furnace body.

 

Specification and Technical Parameter
Model MF power Input voltage DC Current MF frequency
KGPS-400 400kw 380V 800A 1KHZ
KGPS-500 500kw 380V 1000A 1KHZ
KGPS-750 750kw 380V,660V 1500A,850A 0.8KHZ
KGPS-1000 1000kw 380V,660V 2000A,1140A 0.8KHZ
KGPS-1500 1500kw 380V,660V 3000A,1700A 0.5KHZ
KGPS-2000 2000kw 380V,1250V 2273A,1212A 0.5KHZ
KGPS-2500 2500kw 380V,1250V 2840A,1515A 0.5KHZ
KGPS-3500 3000kw 380V,1250V 4000A,2100A 0.5KHZ

 
 
Product Features
● Fast heating speed, high production efficiency, less oxidative decarburization, saving material and forging die cost. Since the principle of medium frequency induction heating is electromagnetic induction, its heat is generated in the workpiece itself. The average worker can use the medium frequency electric furnace to carry out the continuous work of the forging task ten minutes after going to work. The professional workers do not need to burn the furnace and seal the furnace in advance. .
● Excellent working environment, improve workers' working environment and company image, no pollution, low energy consumption. Induction heating is the most energy-efficient heating method in electric heating furnaces. The power consumption per ton of forgings heated from room temperature to 1200 °C is less than 360 degrees.
●The heating is even, the temperature difference between the core and the core is very small, and the temperature control precision is high.
Induction heating heat is generated in the workpiece itself, so the heating is uniform, and the temperature difference between the core and the core is extremely small. The application of temperature control system can achieve precise temperature control to improve product quality and pass rate.
 
Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 0Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 1
 
 
 
 
Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 2
Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 3
Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 4
Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 5
Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 6
Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 7
Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 8
Steel Induction Billet Heating Furnace 10kg Continuous Furnace Heat Treatment 9
Selling Units: Single item
Single package size: 150*100*170cm
Single gross weight: 100,000kg
Package Type: Safety Seaworthy Package
Lead Time:

Quantity (Tons) 1-100 >100
Est. Time(Days) 60 To be negotiated

 

 

اطلاعات تماس
yushuntech

شماره تلفن : +8615895303770

WhatsApp : +15995205725